Export MPLAB Harmony Configurator Pin Diagram and Pin Table (rdaniel)
I am using MPLAB X IDE v3.35 and Harmony 2.00b. I have mapped my peripherals and GPIO using the configurator. Now I would like to export the pin settings to a spreadsheet to pass them along to the...
View ArticleDoes "Harmony Configurator v2" work? (cbeif)
I just created a new Harmony project, trying to use the V2_00b build.I also am using the latest MPLABX v3.40I also installed the "Harmony Configurator v2"The "New Project" dialog box is very very...
View ArticleSwitching dynamic timer driver to static in microchip tcpip example. (V1q)
Hi!I am working on mplabx 3.10 and running program on "pic32mz with fpu and crypto ingine embedded connectivity starter kit" board. My program is based on an example provided with Harmony:...
View ArticleNo Harmony Support for SD Card Bootloader? (red_five)
I have been struggling for weeks trying to build a working SD card Bootloader for my PIC32MX570F512H based project, with absolutely no success. I know my target hardware is OK as I can build the...
View ArticlePIC32 two-speed startup (luker)
Hi forum, my PIC32MZ2048EFH144 has a display attached that it controls via LCC. Now it must learn to run on 3AA secondary cells, backlight dimmed. I configured the "Clock" service to start from FRC...
View ArticleBug: DHCP client fails to handle two DHCP servers on LAN (ScratchMonkey)
It's normal to run multiple DHCP servers for fault tolerance. The protocol allows for this. I'm seeing my PIC32MZ get confused by this. It seems to get multiple offers and then send its request to the...
View ArticleCan't create a project with Harmony 2 BETA (cbeif)
Has anyone been able to create a new project with Harmony 2 BETA?The wrong dialog box pops up, when I try to create a new Harmony Projectin MPLABX IDE v3.35 I did also install the Harmony 2 plug in,...
View ArticleHow go work with older Harmony Project & MHC? (Paul PortSol)
My most recenty development has been in HarmonyV1.08 with matching MHCV1.0.8.7,but I need to go back and work with a test project in HarmonyV1.06.02. I tried just opening the HarmonyV10602 Project with...
View ArticleDriver for SPI EEPROM (ScratchMonkey)
I've got a custom PIC18 board based on the PICDEM.net 2 demo board. It incorporates a for storage. It also has a SPI EEPROM with Ethernet MAC address. I'm migrating the design to a PIC32MZ. I'd love to...
View ArticleWeb pages that run on a PIC32MZ2048EFM144 wont' run on a PIC32MZ2048EFM100...
I have an applicaiton that i am moving from a PIC32EF dev kit to a custom PCB that as a PIC32MZ2048EFM100 on it. It is based on the FreeRTOS demo code, tcpip_client_server. When i put the MPFS file on...
View ArticleQuery PIC32MZ ETHPHY negotiation result (ScratchMonkey)
Is there some API that lets me find out what speed and duplex was negotiated? From the data sheet and chip reference manual, it looks like this should be available in the PHY but I don't see an API to...
View ArticleBSP Harmony v2.0 (bblessing)
This is more of a philosophical question, so I'll give a little background first. We use the Modbus-RTU protocol with nearly all of our products. It's actually pretty easy to implement with Harmony,...
View ArticlePIC32MZ SPI Interrupt Critical issue (jgvicke)
I am trying to get the SPI module to work on the new PIC32MZ ESK. Here is my code: #include "controlSystem.h" #include "hardware_config.h" unsigned int SPI3RDATA; void initSPI3(void) { // setup SCK pin...
View ArticleThere is conflict between the bootloader and the i2c\spi when using harmony?...
Hi, guys. I have a board based on the PIC32MX695F512L, I want to design bootloader program by UART, before that I must initialize some devices on board which have the I2C or SPI interface. when I...
View Articleusing SPI with Eathernet (tony1967)
Hi All,I'm using the Berkey server example as the base of some code, It works fine. I uncheck the USB library and remove the console stuff from app.c. Runs fine. Click on the SPI driver, generate,...
View ArticleSPI Master clock frequency 10 times slower than it should be (dolf)
Using Harmony 2.00b and a PIC32MX340F512H All of the configuration is set up using the graphical "Clock Diagram" in MHC. Configuration bits generated by MHC (from `system_init.c`):/*** DEVCFG0...
View ArticleSys_command to Syslog server? (mrpackethead)
Anyone been able to divert the console to an ip session such as syslog? This would be really handy for debugging when you can't get a uart or USB..
View ArticleOptimization Level Issue - HTTP Server Crash. (mrpackethead)
Not sure if this is a harmony issue, or a XC32 issue, but this has bit me seriously and wasted a LOT of time this week. I had ported an application based on one of the microchip harmony examples to run...
View ArticleHarmony _general_exception_handler (cc11)
Hi All, I am debugging a PIC32MX Harmony project (v1_07_01) that breaks in the '_general_exception_handler' with an error code of 6 I believe this is '' Instruction Bus Error". How do I trace this...
View ArticleUSART Byte Model and Queue Model at the same time (AHancock)
I am working on porting an existing custom board (PIC32MX695F512L) from MLA to Harmony. I use two serial ports, one for RTU Modbus and one for debug output, including TCP/IP Stack console messages....
View Article