Modbus Server on TCPIP speed problem (vibemac.1)
Goodmorning to all,I'm working with a PIC32MX795F512L and using MPLABX 3.35 with Harmony 1.81. I've developed a Modbus Server Protocol on a TCPIP Server socket. Everything apparently works fine as long...
View ArticleHarmony for PIC32MX664F128H to LAN8710A (Falco1029)
Hello! I've been trying to use Harmony to get a pic32MX664 to do some basic UDP, and it's currently tied to a LAN8710A on the PHY side. However, Harmony doesn't have an external PHY option for the...
View ArticleUse flash memory SST25VF064C with ethernet pic32 (davidif)
Hello, I use the module with MRF24WBOMA PIC32 Ethernet Starter Kit SK + i / o expansion card, and I use the file "pic32mx_eth_sk ioexp + 11n freertos.mhc". I want to use the flash Memoirs SST25VF064C...
View ArticleWQVGA PCAP Display Board 4.3" (JgL)
Hello my Friends, please help me, I have a problem with a Touch Screen. The Display works, but only certain areas of the Display are touch-sensitive, while other areas of the display does not work in...
View ArticleSD Card Example Project "sdcard_fat_single_disk" not working in Harmony (SunilP)
Hi all,i am trying to run sdcard_fat_single_disk by doing some modification to port it From PIC32MZ2048ECH144 to PIC32MZ1024ECH144, SPI2 to SPI1 and Crystal frequency 24 MHz to 12 MHz.to do these...
View ArticleBootloader is not working with hex file of size 278kb? (ravic)
Hi, I have created the USB_DEVICE bootloader for my project. I that I am triggering bootloader when there is data written on valid flash address 0x9D061000. In my application firmware, I am...
View ArticleHarmony 2.00b - safe to update? (martinw7750)
Hi Guys, I've downloaded 2.00b and compare to 1.08, can't really see any significant changes.The option to move used Harmony code into my project seems great (assuming it works....) and would be my...
View ArticleGFX_TextCharDraw bug (egcasira)
GFX_TextCharDraw function is expected to draw a character on the screen. The process begins by checking that there is a font and the requested character is available in the selected font. Usually, the...
View Articlechange the DHCP mode with web interface (davidif)
Hello , I program under MPLAB IDE v3.26 x harmony v1_07_01 I use an example of soft home microchip "pic32_eth_wifi_web_server .X" and the BSP (pic32mx_eth_sk) that I changed to my need. do I program my...
View ArticleWhat is Harmony USB Stack BULK Mode transfer speed for PIC32MZ? (cbeif)
I need to send large amounts of data from the PIC32MZ to the P.C. over USB(around 14MB maximum)From my internet readings, even though USB 2.0 is 60MBytes/secI have seen reports that 35MBytes/sec is the...
View ArticleMhcPatcher - modifications to MHC made (quite) easy (VirtualFab)
Hi guys.I'm glad to announce here what I have done to try to help us adding new hardware drivers to MHC.As you probably know, editing MHC menu system files is a tedious task, maybe even worse than...
View ArticleCIC digital filter on PIC32MZ EF and Harmony 2.0 (Johnny0099)
Hello, I need to implement a CIC fiter on Harmony 2.0 and I'm looking at Harmony math library. I'm not an expert of DSP and digital filters. Does someone have experience with FIR, IIR and CIC filters?...
View Articleproblem of programmation (davidif)
I went through a programming problem that I faced and that leads me to ask me a question In made, I could not program my card, is to say that my program was working I could compile only the device...
View ArticleGFX_ImagePartialDraw() (cc11)
Hi, I found this function (GFX_ImagePartialDraw()) in the Harmony graphics frame work and have been trying to use it, I am fairly certain I am doing what they say to do in the function header, but...
View ArticleCode crashes with optimisation set to 0 but runs with level 1 (mrpackethead)
Anyone want to guess why. This is with several of the harmony example apps (nvm_mpfs_web) for example Debugging at 0 is painful..
View ArticleMaking custom changes to Harmony framework files (dsweet@kulshantechnology.com)
I'm knee deep in my first major Harmony project and am running into several scenarios where I feel the need to make minor customizations to the Harmony framework files to meet the needs of my...
View ArticleStill need project under a "firmware" subdirectory? (twelve12pm)
When MPLAB X creates a project, it puts in an extra "firmware" directory. In some older versions of MPLAB X and/or Harmony, things didn't work if that "firmware" directory wasn't there. It also puts...
View ArticleAdding a C++ class introduces errors (tony1967)
Hi All,new to mplabx, harmony and pic development.I've installed mpx, harmony and c++ compiler from microchip websiteI've got the berkley server example up and running.I want to add a c++ class / file...
View ArticleOpening MHC without main project can hang IDE (twelve12pm)
Opening the Microchip Harmony Configurator without a "main project" selected can hang the IDE. MPLAB X v3.40, Harmony v2.00b. This happened to me when I took the following steps: (1) Opened existing...
View ArticleBootloader overlaps with my application code (DominusT)
Hi. I've successfully run the harmony bootloader examples in my ESK I. (Harmony v 1.06.02) I modified the project and adapt it to my hardware. My hardware has an GLCD that is administered via SPI. The...
View Article