New Harmony v1.09 & v2.01b available for download (RISC)
Hi, Just received links today from the Microchip RSS feed for :Harmony v1.09 Harmony v2.01b Regards..
View ArticleScreen switch (bblessing)
Background: MPLAB X IDE 4.00, XC32 v1.44, Harmony v2.04, PIC32MZ2064DAG176, Newhaven 4.3" display with 4-wire resistive touch panel (ST7282T2 internal controller), internal DDR. Would it be possible to...
View ArticleSPI, Harmony, and Ethernet Starter Kit (GMoney)
Hello, I currently have an Ethernet Starter Kit and I am using an I/O Expansion board to connect to another board and share an SPI bus. The aim is to read flash chips and write that data on to a USB...
View Articlemissing AN0 in Mplab Harmony for PIC32Mk0512MCF64 and PIC32Mk1024MCF64...
while configuring project for these 2 PICs , AN0 is missing from the Pintableand in Pinsetup menu it cannot be found . Although i am sure it does exist on pin 13 . In the datasheet it is called ANO ( O...
View ArticleHarmony 2.04 and PIC32MK1024GPE064 (AndyH)
Hi, I'm starting work on a new project using a PIC32MK1024GPE064 part. This is the first time I'll have used Harmony; I've used plib on a number of projects in the past, but as this processor has no...
View ArticleWrapping text (rbmisc)
I have Harmony 2.04 and I would like to know if there is any special character that can be added to a string that will cause it to wrap the text. I would like to have two lines with a string in one...
View ArticleEnabling SNMP breaks all other TCPIP functionality (boyfreda)
Hello, I am working on a project using the PIC32 ESK and MPLAB Harmony v2.04. Up to this point I have the HTTP server running and SMTPC working well. Now I am trying to get SNMP working. The problem is...
View ArticleAudio tone generation maximum frequency (ahachem)
Hi, I'm using MPLAB X IDE v3.61 with Harmony 2.0.4.0 and TLV320DAC3120, I am using the audio_tone example (Sampling Freq= 48Khz) to generate a sine wave, I am only able to generate it until a maximum...
View ArticleWhich way is CAN PLIB going? (AHancock)
I am in the middle of implementing Controller Area Network (CAN) on a PIC32MZ. I have worked on CAN on smaller PICs that use eCAN and on external CAN controller chips (MCP2515), but this is my first...
View ArticlePIC32MX570F512L PMP Chip Select enable issue (craigjbradley)
I am trying to use the chip select on the PMP module on the PIC32MX507F512L. I can configure the chip select polarity, read/write strobes, address/data lines with no problem. The chip select lines to...
View ArticleHarmony WINC1500 driver questions (jcandle)
I need to create a softAP or similar stand alone device. There is a single user who needs to connect and push data into the device. The device routes them into one of three queues, one for commands,...
View ArticleWrite SD card sectors using SDHC in PIC32MZ (Gowdham7777)
Hello,I´m working with a PIC32MZ DA starter kit (PIC32MZ2064DAB288), MPLABX v4.01 and MPLAB HarmonyV2_04 and I want to read and write to an SD card. I don't want to use any File system ,i want to read...
View ArticleDMA-CRC not producing results (snellr314)
MPLAB v3.65. Harmony v1.07.01. MHC v1.0.7.16. PIC32MZ2048EFM144 I can't seem to get the hardware crc to produce any results. My project is just a fresh new blank project, populated with MHC by adding...
View ArticleMPFS vs. NVM (Joho)
I am just learning this PIC32 stuff, so please bear with me if I write something stupid. I would appreciate any advice, no matter how trivial it may seem. I think my issue is the same as this thread...
View ArticleHarmony 2.04 LCC Driver Bug (egcasira)
The Harmony configurator allow the selection of the DMA channel to be used for display refresh, but the selection is not reflected correctly in the source code. When selecting a DMA channel other than...
View ArticleButton issue (bblessing)
Background: MPLAB X IDE 4.00, XC32 v1.44, Harmony v2.04, PIC32MZ2064DAG176, Newhaven 4.3" display with 4-wire resistive touch panel (ST7282T2 internal controller), internal DDR. If you press a button...
View ArticlePIC32MK1024GPE100 and Harmony 2.04 (jtzeng)
Are there any harmony projects in 2.04 that use this processor or its family?..
View Articlearia_showcase/configurations/DM320008/help! (TimH)
I know I have a lot to learn...but... I have purchased a MEBII and DM320008 (PIC32MZ2064DAA288) following advice from Microchip support, so I can see if the tools and processor are suitable for a new...
View ArticleFor Newbies — A New Harmony Book (BillP)
I finally decided to publish a book about Harmony based on many comments and postings from this forum. The book title is “Harmony for PIC32MX Applications” and is available from Amazon and...
View ArticleNew Harmony v1.09 & v2.01b available for download (RISC)
Hi, Just received links today from the Microchip RSS feed for :Harmony v1.09 Harmony v2.01b Regards..
View Article