Quantcast
Channel: MPLAB Harmony
Browsing all 7442 articles
Browse latest View live

harmony1.03 32mx cannot compile for c++,but 32mz compile successed (tangxl)

harmony1.03 32mx cannot compile for c++,but 32mz compile successed.for this suppose,to make a little example project.1.create a harmony project2.create a configuration for 32mx440f256h3.use usb...

View Article


Cant make a simple timer (rangeck)

I'm not new to PICs or embedded firmware. I have 9 years experience. I could make this work if I just dug into the manuals and coded it myself but the point of Harmony is so you don't have to do that...

View Article


A real simple one! (AJThomas123)

Hi, I was hoping someone would please be able to post the main.c for the file: "C:\microchip\harmony\v1_06_01\apps\examples\peripheral\can\echo_send\firmware". I saved over mine in error. Many Thanks...

View Article

PLIB digital with analog pins (breinhold)

If I want to use a pin that supports analog input as a digital GPIO pin, will the PLIB Ports library functions (such as PLIB_PORTS_PinDirectionInputSet, PLIB_PORTS_PinDirectionOutputSet) also take care...

View Article

Possible bug with the FAT file system in NVM in Harmony 1.06 (fsorov)

I'm using the FAT file system in NVM with Harmony 1.06 and PIC32MZ and I found errors in the file system when writing several files or big files (>512 bytes). To try to find out a bit more, and to...

View Article


USB problem #2 (robinhowie)

I am running a simple application on our own hardware based on the sample vendor application. The PC is using a winusb driver. When I send the first command message then I get zeros back.When I send...

View Article

Harmony PPS assignment fault U2RX / RPD14 (RowanT)

Hi, I hope this is the right place to put this..I found a problem with a PPS assignment using harmony, or at least I don't think it's something I'm doing wrong! I'm using a PIC32MX370F512L with MPLABX...

View Article

Why I can not see "Memories to program" (Project Properties) with Mplab X?...

Hi. I have managed to create a project based on the following tutorial: https://www.youtube.com/watch?v=EyclfQkgLnM I wanted to verify "Memories to program" in the project properties. But when you open...

View Article


How to determine if LCD display will be compatible with Harmony Graphics?...

I'm currently shopping for LCD displays but am unable to make decisions. They are supplied with and without a tremendous variety of controllers, drivers, multiplexers etc.. How do you figure out if a...

View Article


Harmony I2S driver (dlb)

Has anyone been able to get the I2S driver functions DRV_I2S_BufferAddWrite, DRV_I2S_BufferAddReadand DRV_I2S_BufferAddWriteRead to work? I've some success with DRV_I2S_BufferAddWrite but that's it...

View Article

In Harmony fs, please add "re-Open file after repetition of attaching and...

Dear Harmony Stuff In Harmony fs, please add sample of re-Open file and re-Read after repetition of attaching and detaching of SD card, namely 1. attach SD card in SD card slot and open file and read...

View Article

pic18f46k22 interfacing with EPSON dot matrix printer M-190G (Yuvaraj S B)

HI,As a part of my project i have to interface an EPSON dot matrix printer M-190G (i have bare mechanism)with PIC18f46K22 and the printer has 20 lines. I don’t have detail of the M-190G printer or...

View Article

Help files not working with MPLABX (davidif)

Hello, I just did the update mplabx well as harmony, mplabx v3.15 harmony_v1_06_01 Only, I do not see help via the MPLAB interface. When I open a new program in harmony I have this error message:...

View Article


Disabling global interrupts in harmony nvm driver (rodejo16)

We are using Harmony v1_04_02 on a PIC32MZ1024ECH100.The Harmony framework file drv_nvm.c has a function called _DRV_NVM_UnlockSequence(). This function disables the global interrupts via function...

View Article

Harmony Configurator does not enable USB I/O in PIN Table (Soren.Bang)

While creating test code for a new hardware design I have run into a problem with the Harmony Configurator. When I enable the USB Library the USB I/O (D+ & D-) does not show up in the PIN table.I...

View Article


SYS_FS_FileWrite() fails with SYS_FS_ERROR_INVALID_OBJECT (Hologram)

I'm seeing odd behaviour from SYS_FS_FileWrite(), which is failing with SYS_FS_ERROR_INVALID_OBJECT.I have an SD card mounted with a FAT file system and an application state machine that successfully...

View Article

CAN Bus: change accepted CAN IDs during runtime (mmw2)

Hi. 1.I would like to change the accepted CAN IDs (filter/mask) during runtime. If necessary with a reboot of the device.Is this possible? ->The CAN PLIB Library is static -> CAN filter/mask are...

View Article


New Harmony releases ... (muellernick)

Hi! I'd expect that new Harmony releases are announced here. Or that there is some other way to notify users. Reading the release notes for v1.06.02, I have to realize that they are not very helpful. I...

View Article

Help: Writing USB MSD device from PC corrupts data (realexander)

Hi, I have a USB device that started life as the MSD+CDC demo. It's running on a PIC32MX270F256D with Harmony 1.06. I've added the File System service so that my PIC32 code can access the same files on...

View Article

moving Harmony project (sebastien.decorme)

Hi,I'm trying to move a sample project from the Hamony framework and unfortunately it doesn't work.I thougth it was a kind of relative path so I've just made a simple copy of the directory like this...

View Article
Browsing all 7442 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>