How do i create a new bsp file, and create new configurations sucessfully...
Im sure i'm just doing something daft, so hopefully someone can suggest somethign; (1) What is involved with creating a new board definition. What i want to do is create a file that matches my...
View ArticleOptimization Level For XC32 With Harmony (Michael Karas)
I see that when generating a project with Harmony that it sets the optimization level for XC32 at -01. First off I would like to understand why this particular setting is done. I just upgraded from...
View ArticleMRF24WN0MA module (davidif)
someone used the MRF24WNOMA module? with the starter kit ethernet + i/o expansion board, it don't work. I used the file "pic32mx_eth_sk+ioexp+11n+freertos.mhc" it load well, the LED1 lights fix but I...
View Articlepin mode problem in bsp/XX/xml/bsp.xml (kanryu)
Hi, all. I made a new bsp config files(called "pic32mx_usb_sk3_mine"), whtch used for harmony projects, and that works almost fine.bat a problem is left.
View ArticleHarmony GPIO pin names in Pin Diagram, Pin Table and Pin Settings (imaketools)
After getting used to MCC, I wanted to do the same in Harmony Configurator (v1.0.7.9, Harmony v1.06.02) to be able to name and assign my own pin names (matching schematic label and software variable...
View ArticleHarmony 1.07 error generating code (jiggoly)
Hi all, I don´t know if it´s an issue or another thing (bad installation, etc..) but when I try to select PMP driver with PIC32MZ2048xxx using MHC disabling "Read Strobe enable" when generate code is...
View ArticleEthernet problem : PIC32 does not reply to arp request with harmony TCP/IP...
Hi,I have a problem for a while. I try to run the tcp server example on my pic32. Config : Win 10, MPLAB X IDE V 3.25 + latest Harmony configurator PIC32MX795F512H + external PHY (waveshare lan8720) I...
View ArticlePlease make fixing SPI/DMA a priority for the next Harmony release...
I read in the release notes for Harmony v1.06 that SPI over DMA is non operational and will be fixed in a future release. This is really disappointing because I have SPI going out over DMA in v1.05. I...
View ArticleDebugging malloc crashes (jautry)
What is the best way to debug GPFs occurring in the malloc routine. I noted no source code for this function. I have recently moved to 1.07 Harmony and am running FreeRTOS as part of the system....
View ArticleDescription of settings in MHC Display Settings - Where are they? (nasuos)
I'm looking to find details on the settings within the MHC Display settings such as: Horizontal Pulse Width, Horizontal Back Porch, Inverting Level shift, Pixel Clock factor, etc... What are these and...
View ArticleHarmony v1.07: New "add" HConfig keyword? (jdeguire)
Hi! I'm updating our codebase to Harmony v1.07 and I noticed that a lot of driver .hconfig files have some new syntax. For example, here is the bottom of...
View ArticleHarmony V1.00 not ready for use - C++ gives invalid conversion errors all...
I am trying to use harmony in a c++ project and when I compile, there are all sorts of invalid conversion errors in the harmony header files! Here is one example:...
View ArticleHarmony v1.07 ADCHS: "ADCFSTAT undeclared" (jdeguire)
I'm not sure if this is a Harmony, documentation, or compiler issue. I'm trying to update a project to Harmony v1.07 with XC32 v1.40 and MPLAB X v3.25. This project uses a PIC32MZ2048EFH144. When I try...
View ArticleUsing 8BPP with standard MEBII Board, LCD, LCC driver, and Harmony (nasuos)
All, Has anyone been able to change the default (out of box configuration) MHC to use 8BPP (8 bits per pixel) instead of the default 16BPP? I have installed all the latest tools (MPLAB X, Harmony Plug...
View ArticleHarmony - ADC setup in the Configurator for Automatic Channel Scan mode...
I am trying to use the Configurator to setup automatically scanning ADC channels 2-15. Has anyone been able to do this? I can do this on my board using MLA, but not Harmony. So, I know the hardware is...
View ArticleUnable to allocate memory using Harmony ! (clydem)
Hi, This is my first post to Microchip Forums. I designed a board & wrote sw 3 or 4 years ago using PIC32MX and MLA.I recently started working on this project again and found I was being encouraged...
View ArticleHarmony USB CDC serial emulator demo baud rate other than 9600 (jws7793)
I've been trying to get the Harmony cdc_serial_emulator demo project working with a baud rate other than 9600 using custom hardware. I got the project to work with 9600 baud sending ascii data to the...
View Article[SOLVED] pic32mz 4-wire resistive touchscreen ADC (ByUsRaceSolutions)
Hi, to be honest I don't know if everybody already solved this and Im just posting out of dateBut it was a lot of work for me and when I've searched in this forum about apparently nobody had solved it...
View ArticleWifi MRF24WN0MA compile errors? (dlock4)
I have designed a PCB with and MRF24WN0MA. Since 2 week now, I trying to have my project compile without errors. Mplax v3.25 and Harmony 1.07 a so many options and I'm lost on what I need to select or...
View ArticleI2C Issues (jautry)
I migrated from 1.06.02 to 1.07 and now my static I2C read and write routines no longer work. Are their examples of a static implementation of this using harmony 1.0.7 anywhere? All I am finding is...
View Article