Executing MPFS2.jar utility through command line (Pranav S. Paralikar)
Hi, I am trying to execute the MPFS2.jar utility through the command line to generate the MPFS Image for the web pages to be used in the firmware. For this I have checked "Execute this line before...
View ArticleHarmony USB CDC serial emulator demo baud rate other than 9600 (jws7793)
I've been trying to get the Harmony cdc_serial_emulator demo project working with a baud rate other than 9600 using custom hardware. I got the project to work with 9600 baud sending ascii data to the...
View ArticlePIC32MZ with NHD-4.3-480272EF-ATXL#-CTP (DPerez)
Hello there,We are working with the PIC32MZ2048ECH144 and the Newhaven TFT NHD-4.3-480272EF-ATXL#-CTP.Our first step was the configuration of the pins correctly (I mean to change the "bsp_config.h"...
View ArticleHarmony TCP/IP: Implementing drivers for other PHYs? (twelve12pm)
Short version of my question: How do I implement my own driver for an Ethernet PHY when using Harmony? Long version: With the old TCP/IP Stack (v5.41.02) on PIC32MX, I implemented my own driver for a...
View ArticleTCPIP_TCP_TASK_TICK_RATE (Netraver)
I have a device with 16 TCP client/server sockets, with fairly frequent opening and closing. I am looking to improve the performance of this device and it has a setting called TCP Task Rate set to a...
View ArticleChanging to static IP mode with 1.07 issue (jautry)
What is now the proper method to bring down and bring up the net with 1.07. My previous method prior to migration to 1.07 no longer works. It is failing in netup routine in LoadNetworkConfig because...
View ArticleHarmony long term support commitment - requesting official stance...
Hi there, I've been watching development of Harmony for the past 18 months and while there are still some substantial problems with things breaking between versions, it seems to be nearly ready for...
View ArticleUpgrading from Harmony V1.06 to V1.07 (NKurzman)
1. The ICMP checkboxes have Chenged and you need to recheck them. 2. System_int.c all the init data is in a different order. Be prepared to spend a good hour moving thins around or losing them. Thanks...
View ArticleWifi MRF24WN0MA compile errors? (dlock4)
I have designed a PCB with and MRF24WN0MA. Since 2 week now, I trying to have my project compile without errors. Mplax v3.25 and Harmony 1.07 a so many options and I'm lost on what I need to select or...
View ArticleConnect to SoftAP fail MRF24W (bikeoid)
I have an MRF24W device configured as SoftAP with no authentication. I can generally connect from Windows 10, but the connection is arbitrarily dropped after a minute or 2. I can connect rarely from...
View ArticleTimer issue trying to use TCP/IP stack - WIFI (emilio32)
I have a project working with: PIC32MZ2048ECH144MPLAB X v3.26HARMONY v1.07 The TCP/IP stack is working fine and the Wifi module as well, with these timer config: /*** Timer Driver 0 Configuration ***/...
View ArticleUSB device hid bootloader on PIC32MZ2048EFM (swissembedded)
Does anybody have the bootloader running on that chip. Does the harmony bootloader require the installation of a special usb device driver?..
View ArticleDistorted images using MEBII board & LCD, LCC Driver, and External Memory...
We are having problems using the external memory with the stock boards with the MEBII Board and LCD. We are using all Microchip Dev Boards and no custom hardware. We also used all the default settings...
View ArticleHarmony v1.07.01 (Johnny0099)
Harmony v1.0.7.01 is now avalable for download from Microchip website. What happened to v1.0.7? Is v1.0.7.01 a bug fix release to solve konown issues with v1.0.7? I can't find any upgrade note about...
View ArticleUsing a Graphic Controler with Harmony. (NKurzman)
I am Moving from the LCC Driver to a Graphic controller.Righ now I have WQVGA. I will be moving to a higher resolution. I want Double Buffereing.Harmony has SSD1926 This appear to not have enough...
View ArticleNeed some guidance (andync)
Hi, I have a working project running under Harmony 1.02 and I am trying to port it to 1.06 but I'm having problems.I'm using MPLABX 3.10 XC32 1.4.The hardware is functioning correctly under the...
View ArticleUnable ro restart a SYS_TMR_CallbackPeriodic() (clydem)
Hi, I am trying to restart a Periodic Callback after it completes it's first pass. It works first time, then I call CallbackStop.The next time I issue the SYS_TMR_CallbackPeriodic to restart the timed...
View ArticleExternal resources file not correct? (PastrelloMarco)
Hi all,Is it possible that "gfx_resources_ext.hex" file can be exported from Harmony Configurator with some bugs?My problems are showed in attachment.My project is composed by custom board with...
View ArticleIs V1.07 working well? (NKurzman)
Has anyone moved to V1.07 without major issues? Is it working OK? I just want some warm fuzzy feelings before I continue with it...
View ArticleBSP for DM330013-2 Pic32Mx250F128B (Jim Nickerson)
I have been having some problems adding a new BSP.With each release of Harmony I think the Help might be a couple of steps behind.I have tried to follow the instructions to no avail.When I open MHC it...
View Article