Has Anybody gotten SMTP Emails to work in Harmony 1.07 ? (clydem)
I have been trying for a few days to get email's sent in my app. I followed all the steps listed in the gargantuan Harmony Help document. I had done this earlier with mla and had it working perfectly....
View ArticleSPI EEPROM (bblessing)
I'm using an MCP25AA320A EEPROM on a project for which I'm trying to upgrade the firmware to be fully MPLAB Harmony compliant, or at least as close to the spirit of Harmony as possible. I ended up...
View ArticleHow to change configuration of DRV_SPI in runtime (felipec84)
I'm working with PIC32 MPLAB Harmony, in particular with the "SPI Driver Library". I work with 2 Hardware SPI but in one of these I have multiple peripherals with differents configurations in one of...
View ArticleHarmony TCP/IP: Implementing drivers for other PHYs? (twelve12pm)
Short version of my question: How do I implement my own driver for an Ethernet PHY when using Harmony? Long version: With the old TCP/IP Stack (v5.41.02) on PIC32MX, I implemented my own driver for a...
View ArticleUSB Console - nolonger working in 1.07.01 (mrpackethead)
I used to be able to use the USB Port, as the console to print messages out, but this no longer works. See my setup in Harmony below.. Throughout my code i am using the console for things like this,...
View ArticleHow do i sucessfully copy a project from the harmony folder to another...
I'm going slightly crazy, trying to copy a harmony example, to be the base of my new project in a completely new location...When I copied the folders it complained it was missing a whole bunch of...
View ArticleDRV_TMR initialization (peterverkaik)
Hi, I have a question about DRV_TMR initialization as found in tcpip projectWeb_server_nvm_mpfs const DRV_TMR_INIT tmrInitData ={ /* moduleInit */ .moduleInit ={ SYS_MODULE_POWER_RUN_FULL}, /* tmrID */...
View ArticleUnable ro restart a SYS_TMR_CallbackPeriodic() (clydem)
Hi, I am trying to restart a Periodic Callback after it completes it's first pass. It works first time, then I call CallbackStop.The next time I issue the SYS_TMR_CallbackPeriodic to restart the timed...
View ArticleHarmony GOL issue (Skaptor)
Hi all, I'm trying to dynamically update a static text widget with a variable, so far I've tried this without any success:sprintf(textpos, "%.3f A",...
View ArticleCreate a new BSP with harmony 1.4.2 (sebastien.decorme)
Hi,Like many people I try to add an new BSP.My custom card looks like the PIC32MZ_EC_SK1-) I've made a copy of the pic32mz_ec_sk directory change the name2-)I've modified the pin in the bsp.xml file3-)...
View ArticleSaving IP settings to Flash under Harmony... Is this built into the...
In the harmony framework, is there a built in way to save network configuration information to flash, so the mode ( dhcp or static, and static ip information ) is saved between reboots? When i use the...
View ArticleMPLABX and Harmony still not ready for production use???? (woodyn)
A year ago I tried to create some projects using MPLABX and Harmony and it was just one stumbling blockafter another until it got to the point of enough is enough and abandoned any PIC32 development. I...
View Articlewindows harmony != macosx harmony??? (mrpackethead)
Ive recently been working on some code using MPLABX 3.26 and harmony 1.07.01 under macos. All is good the code compiles.. I bundled it up and stuck it in the git repo for my team to look at. Some of...
View ArticleExternal resources file not correct? (PastrelloMarco)
Hi all,Is it possible that "gfx_resources_ext.hex" file can be exported from Harmony Configurator with some bugs?My problems are showed in attachment.My project is composed by custom board with...
View ArticleHarmony problem with BufferedAddRead in dynamic USART (carmix)
I'm trying to implement a Buffered Read on the USART of my PIC32MX450 running FreeRTOS 8 and Harmony 1.02 dynamic usart driver with interrupts enabled. In my application I have a console(on USART3),...
View ArticleHarmony Demonstrations versus Tutorials (Paul PortSol)
These Labs/Tutorials are great for learning Harmony, definitely where I would recommend to start:- - From these it is easy to see where things come from, and to do it for a different PIC or PCB....
View ArticleHarmony fails to initialize (Paba)
Hi there, I just installed the MPLAB Harmony Configurator and wanted to try setting up my first project. I followed the "Creating Your First Project" tutorial and created a new project. But when I...
View ArticleMHC 1.07 and SYS_CLK compile problem (BillP)
I am working through a very simple timer project and I have a problem that I think is caused by MHC. I am using the latest versions of Harmony and MHC and the Ethernet Starter Kit II. When I create a...
View ArticleHarmony Configurator: Setup PPS for SPI without enabling SPI driver?...
The SPI driver in Harmony isn't suitable for my application, so I've written a few simple routines to use instead. This necessitates that I turn off the SPI driver in MPLAB Harmony Configurator....
View Article