Hello! I have a PIC32MZ2048EFG100 board where its connected to two ENC28j60 ethernet controllers over the same SPI port but with different CS pins I'll call ETH_CS1 and ETH_CS2. My first trouble is I can't seem to create two instances (see attached image)..
↧
Can't create two instances of ENC28J60 Driver in Harmony (VT Labs)
↧
CAN Bus Tx FIFO status check for PIC32MZ (Jetoleg)
Hello!I am trying to work with Harmony 3 CAN Bus peripheral functions. Noticed function bool CANx_IsBusy() is not implemented for PIC32MZ target. Also interrupt based callback functionality is somewhat flaky, so I had to resort to non-interrupt version. I..
↧
↧
Harmony v2.06 USB not working PIC32MZ2048EFH064 (lelsteph)
Hello I guess another same subject. I am very sorry, I tried to look at many aspects but I cannot get USB to work.The schematic is very common: it worked already on at least 2 other boards. The connections are very short, impedance are adapted, I verified..
↧
Access Denied to Post (laffelt)
I have been trying to submit a post but I keep getting to a page that says "Access Denied"Anyone see this before?..
↧
Harmony v2.06 PIC32MZ Bootloader (laffelt)
After reading all the posts on using Harmony to create a bootloader I have started this phase of development on a current project. I am using Harmony v2.06, XC32 v2.30, and MPLAB v5.10. I decided to use the Live Update feature as it is implied that that m..
↧
↧
CAN BUS Receiving again (dobrosoft)
Hello All. Can any help with next problem? From CAN BUS analyser I send data, PIC32MX Starter kit receives data, but repeatedly the same. From Analyser I send only one message, but I have lot of receiving the same message: This is code: channelEventRX = P..
↧
Harmony v3 : SPI in slave mode and DMA (Deenayd)
Hello, I have been using smaller PICs since years, now I need to use PIC32MZ to get more processing power. I have just installed Harmony v3 (v3.3.0 if I'm not mistaken).Created new project with PIC32EF starter kit (pic32mz2048efm144 processor).Project gra..
↧
Harmony v3: A way to have a "Clean" blit? (KTrenholm)
Hello! I have a question regarding blitting an image/color to a display using Harmony in such a way where I can cleanly transition from one image/color to the next. The problem is a little tough to describe in words so bear with me: MPLAB X v5.30XC32 v2.3..
↧
Harmony V3 USB HOST compiling error (chri)
Pic32MX470F512L Project configured by MHC3 with USB host, MSD client driver and USB full speed driver. All code compiles well, but if i add the usb hub support and generate the code i have a lot of compiling error with defines not found. Looking at a samp..
↧
↧
MX25L Serial Flash - Driver code in framework but not shown in HC? (photon209)
I'm looking at using a different serial flash than the SST26 and noticed there is already code in the framework for the MX25L, which may be more similar to what I need. Is there a reason why this is not available in the Configurator like the SST26? Is it ..
↧
HarmonyV2.06 - Use CAN Bus Driver, or write own? Tools? Suggestions? (Paul PortSol)
Just starting with CAN for my PIC32MZ board. From the posts it looks like CAN Bus is very difficult to do with HarmonyV2.06?- Driver Blocks in init if bus not connected? (any fix?)- Demos not well documented?- MHC Generated code undocumented?- MHC setting..
↧
Cant Launch the Harmony 3 Configurator (Nealet)
HiI am running on a Win 10 machine with MPLAB X IDE v5.30 and XC32 compiler V2.30.I have loaded The Harmony 3 Content Manager and Code Configurator. I have cloned all of the libraries (except for audio) using the content manager.I have a project which I h..
↧
Support for LAN8720A PHY (Nealet)
HiI have just begun with MPLAB, I am converting from another PIC32 IDE using the PIC32MX795F512L. As such i need to port a project into the MPLAB X IDE. My question is, is there support for the LAN8720 Ethernet PHY chip for the PIC32MX. I can see there is..
↧
↧
Resistive Touch Migration to Harmony v2.06 (automate)
Resistive Touch Migration to v2.06. New in release v2.06 is the Input System Service. It is preferred over the deprecated Touch System Service. By default, MHC will attempt to set your pre-v2.06 configuration to the new Input System Service and the interr..
↧
Harmony V3 Came out? (JPortici)
I heard from MARTERS attendees that they tried the V3 beta, then a new plugin recently appeared on MPLABX: Configurator V3 For use with MPLAB Harmony Framework version 3.xx only...
↧
Does harmony 3 support 9in or 10in e-ink (electronic paper) displays? (RodoPIC)
Hi all,I was looking at some e-ink displays (and boy are they expensive!) because of the low power consumption for a project. I was looking at some displays in ebay from waveshare, 9.7in. I also saw Pervasivedisplays from a page in the Microchip site. I w..
↧
I'm curious - has anyone been able to get the Curiosity 2.0 PIC MZ EF Board to work? (BillP)
I already had a Curiosity MZ EF board (version 1.0) and it worked as expected. The "new" version 2.0 eliminated the MRF24W Wi-Fi chip, changed to the 144-pin MZ chip, updated the on-board debugger to PKoB4, and added some new interfaces (audio, graphics, ..
↧
↧
Doubt in slave address setting in I2C (PKM)
I am using SAME54. I try to implement i2c for getting the data from the sensor. I generated the i2c code in harmonic 3 configurator in MPLAB X IDE.I don't know how to set the slave address. I am new to this concept. Please help me to find this...
↧
Harmony 3: SDI1 pin-setting for SPI in PIC32MX270F256B-50I/SP (yts)
Environment: core: v3.4.0, csp: v3.4.0
The problem arises with hysteresis when #3 pin (RA1 pin) is set to SDI1.
Case 1: If you do the followings
1. Set #3 pin to GPIO output pin
2. Generate code
3. Set #3 pin to SDI1
4. Generate code
then SDI..
↧
All Harmony versions: A minor issue with TCPIP_TCP_Flush() (jdeguire)
Like the thread title says, I found a pretty minor issue with the TCPIP_TCP_Flush() function that can affect you if you periodically call it. From what I can tell, this function hasn't changed much too much throughout Harmony's history. This issue is at l..
↧