PIC32 GUI Development Board with Projected Capacitive Touch (Nagendra)
Hi All,I am working on PIC32GUI development board with PCAP Touch and I am using MPLAB Harmony Graphics Composer to create screens and all other graphical Objects. After that I am generating code using...
View ArticleTouch Input on PIC32 GUI Development board with PCAP Touch (Nagendra)
Hello All,I am working on a PIC32 GUI development board with PCAP touch, using MPLAB Harmony. I used Harmony graphic composer to create screens and required widgets. I have created a screen with simple...
View ArticleUsing Old Graphics Libraries with MHC 1.0.8.7 (NKurzman)
Now the I got Harmony V1.08 Running I though I would Update the Splash Screen.I am using the Libraries directly, Not the Composer. The Internal and external Resources seem to behave oddly , I will need...
View ArticleNetwork Stack goes deaf after an indeterminate period (jautry)
I am seeing a strange phenomenon where a network based unit utilizing harmony 1.07 on a PIC32MZ2048ECG100 goes network deaf after several days. If the unit is reset, it recovers. The unit otherwise is...
View ArticleDRV_I2C_Transmit() hangs on master when I2C slave is turned off (Heather)
Hi,I'm using PIC32MZ2048EFH144 (master) to control a motor (slave) on I2C bus. The I2C is configured as Dynamic, interrupt mode on the PIC master. When the motor slave is shut off, the PIC as the I2C...
View ArticleSPI Driver Library - new versions of functions why 2 Buffer handles? (lelsteph)
Hello Using Harmony version 1.07, PIC32MZ2048EFN064.I struggling to understand the library interfaces.There are 2 sets of functions: there is a new set with "2" at the end of all functions. Ex:...
View ArticleDifferential ADC in Harmony (ANKELA)
Hi, I'm currently working with a PIC32MZ2048EFH144, and trying to configure it in Harmony for ADC with differential inputs. Has anyone had any luck with this? The 'Channel Analog Input Mode' sets the...
View ArticleMHC DMA source address (sunilbarot)
I want to use DMA for USART so I select "buffer queue support" and select "Transmit DMA support" and " Receive DMA support"But when I go under DMA under "system services" I see source address under DMA...
View Articleusing "dynamic" peripheral API's (sunilbarot)
I had some success with Harmony so I am encouraged to use it for my project. At this stage I am struggling to understand how to use "dynamic" drivers particularly for following requirement.Set up USART...
View ArticleUSB HOST Bootloader Problem (vibemac.1)
Goodmorning to all,I've been developing an application with a PIC32MX795F512L and I'm trying to implement an USB Host Bootloader. I tried the USB Device demo and it works correctly but with the Host...
View ArticleHarmony v1.08.01 (RISC)
Just noticed that there is a new intermediate release of Harmony today.Regards..
View ArticleLooking for source code to WinUSB_PnP_Demo (RLD)
Title says it all. I have harmony 1.08 and there is this great little demo for usb in \harmony\v1_08\apps\usb\device\vendor\.In that folder in \bin there is a nice little application that reads/writes...
View ArticleGeneric SPI Flash and enhanced SPI Driver (bblessing)
At this point I figured that I would simply share the generic SPI Flash Driver that I implemented. The SPI libraries have been slightly altered to make it so that the SPI Flash Driver and other SPI...
View Article"system_config.h" is it used at all ? (sunilbarot)
I commented out "system_config.h" from two files in my project and it compiles fine. I was reading help pdf from doc folder and came across the explanation of "system_config.h" but when I did search on...
View ArticleHarmony 1.08 video with MZ processor (ksMTI)
Has anyone tried to display video on a 320 by 240 display or any other resolution with harmony? I have as working display using the LCC driver (16 bit RGB interface with PCLOCK), but I do not even know...
View ArticleMy MX is playing in Harmony. (Mysil)
After fumbling around in Harmony for some time, a driver for SSD1963 display controller is starting to come together. The board used is a mikromedia+ with a PIC32MX795F512L , SSD1963 display controller...
View ArticleUSB host firmware with VBUS = 3.3 V (yts)
I would like to run a USB host firmware with VBUS = 3.3 V (the firmware has been confirmed to work properly with VBUS = 5.0 V). Though I changed the following three code lines, the firmware did not...
View ArticleTCP/IP stack with PIC32MX69xx contorller stops receiving packets and keep...
hi,I am using microchip provided TCP/IP stack 5.25 with PIC32MX69xx controller. Some times at heavy traffic situation stack hangs and stops receiving tcp/ip packets even after network get back to...
View ArticleMore about Harmony 1.08.01 and XC32 1.42 and XC 1.40 (js590)
I have made some experiments with my projects mixing Harmony 1.07.01 and 1.08.01 and XC32 1.40 and 1.42.I think that the problem is the XC32 support for part PIC32MX2048EFx100.Using one of the...
View ArticlePIC32MZ USB device class- interrupt mode issue (NeetaK)
I am working on Olimex board for PIC32MZ2048ECG144 I am using the sample code (cdc_com_port_single) provided in the Harmony library for my development. The code works good, but what i find is that even...
View Article