Question about Dynamic SPI Driver using polling method. (pontimaxi)
I'm trying to use the SPI driver set to dynamic mode and using the polling method instead of an interrupt.My device is a PIC32. While running,the code simply adds a single byte to the SPI queue and...
View ArticleWrite to I2C (nouri)
Hi all, i'm using the development board DM320015 with PIC32MX795F512L and the DAC (MCP47FEB02).I have already tested my device with the logic analyser SQ50 and it works.this is my code in the program...
View ArticleH2.03b: ADC Touch : Is this working?? (jtzeng)
I have been move a project from H2.01b to H2.03b for the PIC32MZ2048EFG100.The old project used the AR1011 which does not configure in the H2.03b.I have setup the Touch for ADC as indicated in the...
View ArticleUnmounting USB after unable to open directory causes general exception...
My code tries to open a directory with SYS_FS_DirOpen on a USB stick that isn't there. (This is being done to because I've set up the code to check if a file is on the stick when it has been mounted,...
View ArticleUSB flash drive/ file system writing issues since v2.03b (Digital_Angel)
I have a project using a PIC32MX795F512L that buffers MP3 audio it receives from an encoder and then writes it to a USB flash drive using a FAT file system, it repeats this up to a fixed amount of data...
View ArticleDRV_SPI_BufferAddRead2 in Harmony 2.0b (Johnny0099)
I'm trying to figure out how the new DRV_SPI_BufferAddRead2 function that will replace DRV_SPI_BufferAddRead works: DRV_SPI_BUFFER_HANDLE DRV_SPI_BufferAddRead2 ( DRV_HANDLE handle,void *rxBuffer,...
View ArticleWidget parent/child relationship with alpha blending (bblessing)
Background: MPLAB X IDE 3.65, XC32 v1.43, Harmony v2.03b, custom board using PIC32MZ2064DAH176, Newhaven NHD-4.3-480272EF-ASXN#-T display (4.3", 480x272 pixel, 4 wire resitive touchscreen) I'm...
View ArticleLong pauses between SPI write operations (AndreaC)
I need to control an external ADC, an AD5664R, from a PIC32MZ through SPI. The communication works properly but it's very slow. The clock is set to 50 MHz. To set all four channels I need to send 4...
View ArticlelaWidget_SetDrawBackground function not found (replaced by...
I tried to set the draw background for a rectangle and when I compiled, laWidget_SetDrawBackground function wasn't found.I searched the Harmony 2.03b directory and didn't find any reference to it.I...
View ArticleWhy must a filter\mask be enable in CAN receive mode (Jef Patat)
Hi, the Harmony configurator has a note "**** Warning: A Filter \Mask Must be Enabled if in CAN Receive Mode. ****" Why is this? I find no such thing in the PIC32 reference manual section 34....
View ArticleGraphics write time (bblessing)
Background: MPLAB X IDE 3.65, XC32 v1.43, Harmony v2.03b, custom board using PIC32MZ2064DAH176, Newhaven NHD-4.3-480272EF-ASXN#-T display (4.3", 480x272 pixel, 4 wire resitive touchscreen) For this...
View ArticleUnable to configure a touch driver (Ger jackson)
Hi all,I am new user working with PICs so it will try to be clear. I am programming a resistive screen with a touch dirver AR1021.PIC: PIC32MZ2048ECH144 and Harmony version 1.11. The fact is I can...
View ArticleDual Role USB Stack for Harmony? (ProtoMahn)
Is there a plan the implement a Dual Role USB stack for the Harmony Framework? If not - are there any suggestions for how to implement Dual Role functionality?..
View ArticlePorting to Harmony and FreeRTOS (AHancock)
I have a custom PIC32MX695F512L board that I am porting to Harmony (1.07) and FreeRTOS. It currently runs MLA and a home brew RTOS (good riddance). I am porting one peripheral at a time to get a feel...
View ArticleButton bounce (rbmisc)
I have buttons when pressed bounce, two pressed with one release between them. This is messing up logic I have for pressed. I do one thing on the first press and then something on the second press. I...
View ArticleUsing the console and command system services, what is the right way to do...
This is both a comment and a question so if I have missed something important I would gladly accept advice. I have a couple of ongoing projects where the PIC board needs to accept commands from a host...
View ArticleMisconversion occurs in commentline of generated file by "template *.ftl"....
Dear Microchip Harmony Stuff I use Shift JIS encoding. In commentline, namely text after // , I use Japanese of Shift JIS encoding. Thid text occurs Misconversion. Please see attached pictures. one is...
View ArticlePorting out Sample Project for a Starting Point (Michael Karas)
Working with Harmony 2.03b and PIC32MZ..EF. I am looking for guidance on how to easily port a sample project that is coded for a Microchip SDK out of the Harmony folders for use as starting place for...
View ArticleImplementing a PWM H-Bridge on PIC32MZ2048EFM064 using Harmony (ilans)
Hi!I want to implement a PWM H-Bridge.meaning, I want to see an output like this: pio1: ______|||||||||______|||||||||______|||||||||______|||||||||pio2:...
View ArticleTCPIP stack question.. Is it intialised or not? (mrpackethead)
2.03/xc1.42 in sys_init.c, TCP_STACK_Init() is called, and then a check is done to see if its initialised. However I'm really confused by the stock code. Why would it assert the message "Init Failed"...
View Article